The hole from the DSPO was cured with some aluminum rivets and thick aluminum plating. It was strong enough that with a LOT of weight pushing down on it there wasn't any signs of popping out. Again all surfaces were sanded & xyloled.
The other little screw holes filled in with the herculiner by themselves, but a couple of 1/4" holes had to be taped from the bottom to keep from draining thru to the underside! *Use a big fan when applying this stuff in an enclosed area to reduce the odors unless you have brain cells to spare.*
Heres the finished product:
To the left:
To the right:
and the rest:
I can say that except for gearwhine the vehicle is much more liveable and has less drumming going down the road.
No comments:
Post a Comment